Produse

Cablu audio jack 3.5mm tata 3rca 5mm 1.5m. Folosesti produsul pentru instalatii si proiecte tehnice.Specificatii: 5mm, 1.5m.Livrare rapida. Suport la alegere si compatibilitate.

Read more less

Conector rapid imbinare LT-33 pentru conectare. Folosesti produsul pentru instalatii si proiecte tehnice.Livrare rapida. Suport la alegere si compatibilitate.

Read more less

N-MOSFET; 40V; 162A; 200W; TO220

Read more less

Ø18x31,5mm

Read more less

PIF+SIF REVERSE RF AG

Read more less

GreenChip Switched Mode Power Supply Regulator and Controller, DIP-8

Read more less

The High Speed HDMI® cable is designed to handle video resolutions of 1080p and beyond, including advanced display technologies such as 4K, 3D, and Deep Color plus an additional, dedicated data channel, known as the HDMI® Ethernet Channel, for device networking. • HDMI Ethernet channel • Audio return channel • 3D over HDMI • 4K x 2K resolution support • Expanded support for color spaces

Read more less

DOUBLE DIP SOCKET 2.54mm(0.100’’) Material:Housing:30% Glass filled PBT UL94V-0 Contacts:Phosphor Brone Plating(Gold plated):3u’’ over 50u’’ nickel (Tin plated):100u’’ over 50u’’ nickel Electrical Characteristics:Current Rating:1 AMP Insulator Resistance:5000MΩ min, at DC 500V Contact Resistance:20mΩ max, at DC 100mA Operating Temperature:-55°C~+105°C Features:For DIPs with.100’’ lead spacing. Lever actuated zero inserrtion force mechanism. Socket easily disaaaembles for repairability. Socket contact point of.110’’ bellow top surface of socket.

Read more less

Features : RC522 chipMF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip, launched by the company for the "table" application of a low- voltage, low-cost, small size of the non-contact card chip to read and write, smart meters and portable handheld devices developed better choice. The MF RC522 use of advanced modulation and demodulation concept completely integrated in all types of 13.56MHz passive contactless communication methods and protocols. 14443A compatible transponder signals.The digital part of to handle the ISO14443A frames and error detection. In addition, support rapid CRYPTO1 encryption algorithm, terminology validation For products. MFRC522 support For series of high-speed non-contact communication, two-way data transmission rate up to 424kbit/s. As new members of the 13.56MHz reader card series of highly integrated chip family, MF RC522 MF RC500 MF RC530 There are a lot of similarities, but also have many of the characteristics and differences. Communication between it and the host SPI mode helps to reduce the connection narrow PCB board volume, reduce costs. RFID moduleThe MF522-AN module the the original MFRC522 chip design circuit card reader, easy to use,low cost, and applies to the user equipment development, the reader and the development of advanced applications, the need for the user RF card terminal design/production. This module can be directly loaded into the various reader molds. Utilizes a voltage of 3.3V, through the SPI interface simple few lines directly with any user CPU motherboard connected communication can ensure that the module is stable and reliable work, distance card reader; Electrical parametersOperating current :13-26mA/DC 3.3VIdle current :10-13mA/DC 3.3VSleep current: <80uAPeak current: <30mAOperating Frequency: 13.56MHzProduct physical characteristics: size: 40mm×60mmEnvironmental Operating temperature: -20-80 degrees CelsiusEnvironmental Storage Temperature: -40-85 degrees CelsiusRelative humidity: relative humidity 5% -95%Module interfaces SPI ParameterData transfer rate: maximum 10Mbit/s

Read more less

N-FET 600V 3.5A 35W <2E2

Read more less

IC CTRLR PWM QUASI-RESON 8DIP

Read more less

suport aluminiu 1mm rigidalb rece

Read more less

Specifications1.Input voltage range:4-38VDC2.Output voltage range:1.25-36VDC adjustable3.Output current: 0-5A4.Output power: 75W5.High efficiency up to 96%6.Built in thermal shut down function7.Built in current limit function8.Built in output short protection function9.Input reverse polarity protection: None (if required, high current diode in series with the input).10.L x W x H =61.7*26.2*15mm11.Weight: 20g Application1.Use as a step-down modules with overcurrent protection capabilitiesUsage:(1) adjust the “voltage potentiometer” so that the output voltage reaches the value you want.(2) use a multimeter to measure the output short-circuit current with 10A stalls, while regulating the “current potentiometer” so that the output current reaches a predetermined overcurrent protection value. (For example, the meter displays the current value of 4A, then you can use the module to a maximum current of 4A)(3) Connected to the load. 2.Use as a battery chargerUsage:(1). Make sure you need to charge the battery float voltage and charging current; (if lithium parameters 3.7V/2200mAh, then the float voltage is 4.2V, the maximum charging current 1C, ie 2200mA)(2). Under no-load conditions, adjust the “Voltage potentiometer” so that the output voltage reaches the float voltage; (if to 3.7V rechargeable lithium battery, the output voltage can be adjusted to 4.2V)(3). use a multimeter to measure the output short-circuit current with 10A stalls, while regulating the “current potentiometer” so that the output current reaches a predetermined Charging current value.(4). Charge turn lamp current factory default is 0.1 times the charging current; (Battery during charging current is gradually reduced, if the charge current setting is 1A, then when the charge current is less than 0.1A, blue lights turned off, the green light is on, which means that the battery is fully charged)(5).connected to the battery charge.(1,2,3,4 steps as: Output is unloaded, do not connect the battery) 3.Use as a LED constant current driver moduleUsage:(1). adjust the “voltage potentiometer” so that the output voltage reaches the value you want.(2). use a multimeter to measure the output short-circuit current with 10A stalls, while regulating the “current potentiometer” so that the output current reaches a predetermined LED operating current.(3). Connect LED, work.(1,2 steps as: Output is unloaded, do not connect LED)

Read more less

STEREO MULTIPLEXER

Read more less